Solutions

1. Strengthen security protection ‌1)Accurate identity verification‌ ‌2)Active risk defense‌ 3)Level management of permissions‌   2. Improve traffic efficiency and management level ‌1)Fast and non-contact traffic‌ 2)Automated process optimization‌ 3.Data-driven decision support ‌1)Real-time data collection‌ ‌2)Visual analysis tool‌   4.Image and collaborative value ‌1)Modern image shaping‌ 2)Multi-system collaborative management‌   5. Compliance and sustainability ‌1)Privacy protection mechanism‌ 2)Low energy consumption and long-term operation‌

1. High security protection capability ‌Anti-tailing and illegal intrusion‌: The full-height turnstile effectively prevents people from following, climbing or forcibly intruding through the closed channel design and rotating gate rod structure, ensuring the safety of the factory area. ‌ Precise authority control‌: It supports docking with access control systems (such as card swiping, fingerprint, and face recognition), allowing only authorized employees or visitors to pass, and preventing unauthorized personnel from entering sensitive production areas.   2. Efficient access and real-name management ‌Real-name verification‌: It can be connected to the factory labor real-name management system to automatically record employee access time and identity information, which is convenient for attendance statistics and personnel tracing. ‌ Fast access response‌: After legal verification, the gate machine opens within 0.2-0.5 seconds, and the single-channel access speed reaches 30 people/minute, which meets the peak flow of people in the factory.   3. Environmental adaptability and durability ‌Impact-resistant material‌: It adopts a stainless steel body and anti-rust process to withstand dust, moisture and mechanical collision in the factory environment, reducing the equipment loss rate. ‌ All-weather operation capability‌: Equipped with waterproof and dustproof design, it can operate stably at the open-air or semi-open-air factory gate and adapt to extreme weather environments.   4. Intelligent function integration ‌Data linkage management‌: The traffic data can be synchronized to the factory security system or ERP system to realize the automated management of personnel entry and exit records and production scheduling. ‌ Emergency evacuation mode‌: When there is a power outage or fire, the gate bar automatically unlocks to form an barrier-free passage, meeting the factory fire evacuation requirements.   5. Cost and maintenance advantages ‌Low maintenance cost‌: The gearless mechanical structure and modular design simplify daily maintenance, and the failure rate is lower than that of traditional gates. ‌ Flexible scalability‌: Supports the installation of temperature measurement, metal detection and other modules to adapt to the factory security upgrade requirements.   6. Scenario adaptability ‌Multi-channel compatibility‌: Single-channel or dual-channel combinations can be customized according to the width of the factory entrance to optimize space utilization. ‌ Vehicle collaborative management‌: Some models support linkage with the vehicle gate in the factory area to achieve human and vehicle diversion control.

1. High-security protection   ‌Precise anti-tailgating‌: Tripod gate effectively prevents tailgating and intrusion through the scientifically designed gate pole spacing (only one person can pass) and mechanical locking mechanism, reducing the risk of damage to scenic area facilities. ‌ Emergency evacuation guarantee‌: When the power is off, the gate pole automatically falls to form a barrier-free passage, which meets fire protection requirements and ensures the rapid evacuation of tourists in an emergency.     2. Efficient passage and intelligent management Diversified ticket checking methods‌: Supports multiple verification methods such as QR code, ID card, and face recognition to reduce manual ticket checking errors and improve the efficiency of tourists entering the park (passing speed reaches 30 people/minute).   ‌Intelligent ticket type identification‌: It can automatically distinguish different types of tickets such as group tickets and discount tickets to avoid manual verification omissions and shorten the waiting time of tourists.   3. Data-driven operation optimization ‌Real-time passenger flow statistics‌: Automatically record data such as the number of people entering the park, ticket purchase channels, passenger flow peaks, etc., generate visual reports, and assist scenic spots in formulating operation strategies. ‌ Dynamic crowd flow monitoring‌: Real-time statistics of the number of tourists in the park, providing data support for scenic area safety management and tourist diversion.   4. Environmental adaptability and durability ‌Outdoor waterproof design‌: Adopting seamless welding technology and internal drainage structure, the waterproof performance is better than that of wing gates and swing gates, suitable for long-term use in open-air scenic spots. ‌Highly durable material‌: The stainless steel shell and gearless mechanical structure take into account rust and corrosion prevention and low maintenance costs, ensuring long-term stable operation of the equipment.   5. Cost-effectiveness and functional expansion ‌Outstanding economic efficiency‌: Compared with wing gates and swing gates, tripod gates have lower purchase and maintenance costs, suitable for large-scale deployment in scenic spots with limited budgets. ‌Flexible functional expansion‌: It can integrate modules such as temperature measurement and fingerprint recognition, or connect to the ticketing system to realize more derivative functions (such as membership management and secondary consumption statistics).   6. Improved user experience ‌Fast pass experience‌: Simplify the ticket checking process, reduce the waiting time of tourists, and improve the overall tour satisfaction. ‌Intuitive interactive design‌: Equipped with a 7-inch high-definition screen and voice broadcast system, real-time feedback on ticket checking status, lowering the operation threshold.

1. Enhance security protection capabilities 1) Physical interception advantages. The full-height turnstile is more than 2 meters high and adopts a fully enclosed structure design, which can completely block illegal intrusions such as climbing, climbing over or drilling down, especially suitable for closed communities that require strict control. ‌Multiple identity authentication technology.   2. Optimize traffic efficiency and order management ‌1) Senseless fast passage. ‌2) People and vehicle diversion management. ‌3) Automated data recording.   3. Upgrade intelligent management capabilities ‌1) Multi-system linkage control. ‌2) Remote operation and maintenance and authority adjustment.   4. Durability and environmental adaptability ‌1) High-strength material guarantee. ‌2) Low energy consumption and easy maintenance.   5. Improve community image and living quality ‌1) High-end technological design. ‌2) Privacy compliance guarantee.

1. High-precision electrostatic detection and safety protection ‌Precise testing‌: Built-in high-precision electrostatic tester can accurately measure the amount of electrostatic charge carried by the human body to ensure that it meets the safety threshold. ‌ Automatic locking mechanism‌: When the static electricity exceeds the standard, the gate will automatically lock and prohibit passage to avoid static electricity from harming equipment or causing safety accidents.   2. Intelligent access control integration ‌Authorization verification and access control‌: Combined with access control systems (such as ID cards, fingerprints, etc.), only authorized and qualified personnel are allowed to pass through, strengthening regional security management.   ‌Illegal intrusion alarm‌: Real-time sound and light alarms are triggered for tailgating, reverse intrusion and other behaviors to improve the security level of the venue.   3. Efficiency and stability ‌Quick response‌: Electrostatic testing and passage judgment are completed in a short time, improving passage efficiency36. ‌Stable operation‌: Advanced electrostatic induction technology and durable materials (such as stainless steel structure) are used to ensure long-term stable operation and reduce failure rate.   4. Data management and traceability ‌Full process recording‌: The system automatically records data such as personnel identity, passage time, and electrostatic test results for easy traceability and analysis.   5. Cost and design advantages ‌Economical‌: Compared with other types of gates, the three-roller gate has a lower manufacturing cost and does not require the installation of additional anti-tailing components.   ‌Simple structure and compatibility‌: The design is simple and easy to use, and first-time users can operate it without training, and it supports seamless connection with multiple systems (such as access control and biometrics).   6. Scenario adaptability ‌Applicable to multiple industries‌: Especially suitable for industries that are sensitive to static electricity, such as electronics, chemicals, and food processing, to meet high standards of static protection.

1. High security protection ‌Illegal intrusion interception‌: The large-area baffle design can effectively prevent climbing, following and forced intrusion, and improve the regional security protection capability.   ‌Emergency evacuation optimization‌: In an emergency, the baffle can be quickly retracted to form an barrier-free passage, which is convenient for rapid evacuation of personnel.   2. Efficient passage and management ‌Quick response and passage‌: After the sensor detects legal passage, the baffle opens within 0.2-0.5 seconds to meet the needs of rapid passage of people in office buildings during peak hours in the morning and evening. ‌ Intelligent permission control‌: Supports integration with access control systems (card swiping, face recognition, etc.) to achieve accurate identity verification and only allow authorized personnel to enter specific areas.   3. Environmental adaptation and aesthetics ‌Simple appearance design‌: The baffle with smooth lines is combined with metal/glass materials to adapt to the style of modern office buildings and avoid visual abruptness. ‌ High space utilization‌: When closed, the baffle is close to the fuselage, reducing the occupation of channel space, which is suitable for the layout of narrow areas at the entrance of office buildings or between floors.   4. Stability and convenient maintenance ‌High-strength and durable material‌: Stainless steel or metal frame structure is used, which is highly impact-resistant, can operate stably for a long time, and reduces maintenance frequency.   ‌Intelligent fault detection‌: The drive system has built-in overload protection and fault alarm functions, which automatically shuts down and prompts when abnormal, reducing the impact of sudden faults on traffic.   5. Scenario expansion capability ‌Multi-system compatibility‌: It can be connected to the attendance system, visitor management system, etc. to realize the linkage management of personnel traffic data and attendance/visitor records45. ‌ Customized service‌: The baffle material (such as transparent acrylic), channel width (550mm-900mm), etc. can be flexibly adjusted according to the specific needs of the office building.

1. Structural stability and load-bearing capacity   Strengthen support design The stainless steel base adopts a steel frame structure (such as internal steel skeleton + external 304 stainless steel wrapping) to provide high-strength mechanical support to ensure that the gate does not deform under frequent use or external impact. ‌ Compression and fatigue resistance The base and chassis are integrated into a design that can withstand high-intensity operation of more than 20 million continuous opening and closing times, and its life span far exceeds that of ordinary materials.   2. Excellent environmental adaptability   Corrosion and rust resistance 304 stainless steel has excellent rust and acid and alkali corrosion resistance, and is suitable for harsh environments such as humidity and salt spray (such as subway stations and outdoor places), and will not rust after long-term use.   ‌Stable operation in a wide temperature range The operating temperature range covers -35℃ to 75℃, and it can still maintain stable performance in severe cold or high temperature environments.   ‌Dust-proof and moisture-proof design The base has strong sealing and supports 90% humidity environment (no condensation), effectively preventing rain and dust from invading the internal electromechanical structure.   3. ‌Safety and Functional Expansion Advantages‌   ‌Emergency Avoidance Mechanism‌ When the power is off, the wing arm automatically opens to form an barrier-free passage, which meets the requirements of fire escape; some models support remote control of the pole drop, which is convenient for emergency management.   ‌High-precision sensor integration‌ The base provides a stable installation platform for infrared sensors and anti-tailgating detection modules to ensure accurate passage logic (such as AAA-level anti-recoil judgment).   ‌Multi-function expansion base‌ The stainless steel base reserves standard interfaces (such as RS485), which can be seamlessly connected to intelligent systems such as face recognition and QR code scanning to meet customized needs.   4. ‌Long-term cost-effectiveness‌   ‌Low maintenance cost‌ Stainless steel material has strong wear resistance, the surface is easy to clean and not easy to scratch, reducing the frequency of daily maintenance and renovation costs.   ‌Long life cycle‌ Compared with ordinary metal or plastic bases, the stainless steel structure combined with the brushless motor movement can reach a comprehensive life of more than 5 million times, reducing the frequency of replacement.

1. High-intensity security guarantee‌ ‌Dual anti-pinch mechanism‌: Mechanical + infrared sensing dual protection, automatic rebound or stop when encountering obstacles, greatly reducing the risk of pinching; ‌ Real-time active defense‌: Accurately identify illegal intrusion, reverse passage and tailing behavior, triggering the sound and light alarm system; ‌ Strong physical interception ability‌: The gate rod is automatically locked when unauthorized passage is not authorized, effectively blocking violent collision.   2. Fine management adaptation‌ ‌Traffic strategy can be customized‌: Support one-way control, two-way control or reverse free passage mode, flexibly matching the time management needs of office buildings (such as morning and evening peak diversion); ‌ Multi-system seamless integration‌: Compatible with multiple verification methods such as face recognition, card swiping, QR code, etc., to achieve hierarchical management of employees and visitors; ‌ Intelligent energy-saving design‌: Automatically reset and shut down when idle, reducing standby energy consumption.   3. Durability and environmental adaptability‌ ‌Tolerance to extreme environments‌: Stable operation at -40℃ to 80℃ temperature and 90% humidity, resistant to wind and rain erosion; ‌ Extreme service life‌: Solid mechanical structure, standard service life of over 6 million times, significantly reducing maintenance costs12; ‌ Emergency evacuation guarantee‌: The gate lever automatically opens when power is off to ensure smooth fire passage.   4. High-end scene matching‌ ‌Simple aesthetic design‌: Stainless steel material with streamlined shape, in line with the image requirements of modern office buildings; Low noise operation‌: The operating volume is ≤55 decibels to avoid interference with the office environment. Applicability Notes‌ ‌Traffic efficiency limit‌: about 30-40 people/minute, lower than the wing gate (45 people/minute 10), more suitable for high-end office buildings or VIP exclusive channels with medium traffic; ‌ Alternative solution for ultra-high traffic scenarios‌: The double-motor wing gate can be increased to 60 people/minute , suitable for ultra-large traffic entrances.

1. Superior structural performance ‌Lightweight and high strength‌ The density of aluminum alloy is only 1/3 of that of steel, but through cross-section optimization design (such as rib structure), it can reach a load-bearing capacity of more than 800kg/㎡, reducing the building load while ensuring structural stability.   ‌Weather resistance and corrosion resistance‌ The natural oxide layer combined with surface treatment technology (such as fluorocarbon spraying and anodizing) makes it far more corrosion-resistant than traditional steel in humid and salt spray environments, and its service life can reach more than 30 years. ‌ Seismic and deformation-resistant‌ The flexible frame structure and elastic modulus characteristics can effectively absorb the displacement stress of the building and maintain physical stability in response to extreme temperature differences (-30℃ to 60℃).   2. Outstanding energy-saving and environmental protection performance ‌Optimized thermal performance‌ When paired with hollow glass or PU filling layer, the U value of the aluminum alloy system is ≤1.5W/(㎡·K), reducing indoor and outdoor heat exchange and saving more than 21% of air conditioning energy consumption17. ‌Sound insulation and noise reduction‌ The double-layer structure with sealed design can achieve an airborne sound insulation of 45dB, which is better than ordinary wall structures and ensures a quiet office environment.   ‌Environmental protection throughout the entire life cycle‌ 95% of the components are recyclable and reused, and no formaldehyde is released during the construction process, which meets the requirements of LEED green building certification.   3. Spatial aesthetics and functional adaptation ‌Design freedom‌ Supports 200+ color options, combined with brushed, wood grain transfer and other processes, and can customize special-shaped components to meet the needs of modern minimalist to classical decoration.   ‌Flexible space organization‌ The partition system can achieve a demolition and reconstruction rate of more than 85%, and can quickly adjust the office layout with glass modules to adapt to the dynamic development of the enterprise. ‌ Transparent lighting optimization‌ The narrow frame + large glass surface design maximizes the introduction of natural light, combined with the intelligent shading system to improve the quality of the spatial light environment.   4. Economic efficiency and convenient maintenance ‌Construction cycle reduction‌ The prefabrication rate exceeds 95%, the installation efficiency is 30% higher than the traditional process, and the construction period is shortened by. ‌ Reduced operation and maintenance costs‌ The failure rate is less than 1% during the 10-year warranty period, and only neutral detergent is required for cleaning and maintenance. The comprehensive maintenance cost is 40% of that of stone curtain walls. ‌ Value-added space shaping‌ Pre-install pipeline channels through BIM technology, reserve intelligent equipment interfaces, and support future office scene upgrades. ‌ Summary‌: Aluminum alloy achieves a balance between performance, aesthetics and sustainability in high-end office building applications. Its modular design, recyclable characteristics and intelligent integration potential are in line with the future development trend of green and smart buildings.